Publications

Summary:
This report examines pedestrian and motorist behavior on arterials in Washington State and determines how, if at all, these behaviors change when various engineering treatments are applied. The treatments that were examined included crosswalk markings, raised medians, in-pavement flashers, signage, stop bars, overhead lighting, and sidewalks. The relationships between pedestrian travel and transit use, origin-destination patterns, traffic signals, and schools were also explored.

Summary:
This paper documents the development of data collection methodologies that can be used to measure truck movements along specific roadway corridors in Washington State cost-effectively. The intent of this study was to design and test methodologies that could provide information to ascertain the performance of freight mobility roadway improvement projects. The benchmarks created would be used to report on speed and volume improvements that resulted from completed roadway projects.

Summary:
This report documents the development of data collection methodologies that can be used to cost effectively measure truck movements along specific roadway corridors selected by transportation agencies in Washington State.

Summary:
As commercial vehicle activity grows, the environmental impacts of these movements have increasing negative effects, particularly in urban areas. The transportation sector is the largest producer of CO2 emissions in the United States, by end-use sector, accounting for 32% of CO2 emissions from fossil fuel combustion in 2008.

Summary:
Despite their heavy use of the road transportation system, little data is available on trip generation rates for trucks. In this paper, truck trip rates from grocery stores are used in a case study to evaluate and compare two simple methods for collecting data on truck trip generation: telephone interviews and manual counts. The findings from this study showed that grocery stores generated an average of 18 truck trips per day on a typical peak period weekday. The results also...

Summary:
The Washington State Department of Transportation (WSDOT), Transportation Northwest at the University of Washington (UW), and the Washington Trucking Associations (WTA) have partnered on a research effort to collect and analyze global positioning systems (GPS) truck data from commercial, invehicle, truck fleet management systems. This effort was funded by the Washington State Legislature, and its purpose is to develop a statewide freight performance measures program for use by WSDOT.

Summary:
The effective and efficient movement of freight is essential to the economic well-being of our country but freight transport also adversely impacts our society by contributing to a large number of crashes, including those resulting in injuries and fatalities.

Summary:
A number of trucking companies use Global Positioning System (GPS) devices for fleet management. Data extracted from these devices can provide valuable traffic information such as spot (instantaneous) speeds and vehicle trajectory. However, the accuracy of GPS spot speeds has not been fully explored, and there is concern about their use for estimating truck travel speed. This concern was addressed by initially comparing GPS spot speeds with speeds estimated from dual-loop detectors.

Summary:
This paper presents a systematic methodology for identifying and ranking bottlenecks using probe data collected by commercial GPS fleet management devices. This methodology is based on the hypotheses that truck speed distributions can be represented by either a unimodal or bimodal probability density function, and it proposes a new reliability measure for evaluating roadway performance.

Summary:
The Port of Seattle surveyed drayage truckers serving the port in 2006, 2008, and surveyed drivers again in 2013 in partnership with the University of Washington. This thesis describes the methodology used to survey drayage drivers at the Port of Seattle, describes the economic conditions of drayage drivers at the port and changes in economic conditions since previous surveys, and attempts to model driver earnings based on other driver characteristics.

Summary:
Although trucks move larger volumes of goods than other modes of transportation, public agencies know little about their travel patterns and how the roadway network performs for trucks. Trucking companies use data from the Global Positioning System (GPS) provided by commercial vendors to dispatch and track their equipment.

Summary:
Global positioning system (GPS) devices that are installed in trucks and used for fleet management are increasingly common. Raw data from these devices present an opportunity for public agencies to use these trucks as probe vehicles to better monitor roadway operations and to quantify transportation system efficiency.

Summary:
Efficient and reliable goods movement via our nation’s highway system is critical to the nation’s economy and quality of life. Truck mobility is one of the key performance measures for evaluating the conditions of goods movement and supporting freight planning. Truck GPS data can be useful in developing truck mobility measures and providing insights into freight planning.

Summary:
This paper describes the development of a systematic methodology for identifying and ranking bottlenecks using probe data collected by commercial global positioning system fleet management devices mounted on trucks. These data are processed in a geographic information system and assigned to a roadway network to provide performance measures for individual segments.

Summary:
This article considers the effectiveness of a truck appointment system in improving yard efficiency in a container terminal. This research uses the truck appointment information obtained from an appointment system to improve import container retrieval operation and reduce container rehandles by adopting an advanced container location assignment algorithm. By reducing container rehandles, the terminal could improve yard crane productivity and reduce truck transaction time.