Publications

Summary:
The rapid growth in e-commerce activities and the constant specialization of industries have aroused an unparalleled demand for trucking in urban areas, leading to growing concern over its interference to the transportation system.

Summary:
Currently, knowledge of actual freight flows in the US is insufficient at a level of geographic resolution that permits corridor-level freight transportation analysis and planning. Commodity specific origins, destinations, and routes are typically estimated from four-step models or commodity flow models. At a sub-regional level, both of these families of models are built on important assumptions driven by the limited availability of data.

Summary:
This paper presents a framework to classify and mitigate roadway bottlenecks and that is designed to improve freight mobility. This is in recognition that roadway operations for trucks are under studied, truck-only bottlenecks are often not identified and freight-specific problem areas are therefore often overlooked. The framework uses four-steps: Step 1: identifies and locates the roadway sections where vehicle travel time is in excess of what would normally occur.

Summary:
This paper introduces a novel quay crane design, a double girder bridge crane (DGBC). DGBC is capable of handling containers of two adjacent bays simultaneously, avoiding crane collisions, saving traveling and repositioning costs, and eventually improving terminal efficiency. This problem is formulated as a resource-constrained project scheduling to minimize the maximum completion time.

Summary:
Although trucks move the largest volume and value of goods in urban areas, relatively little is known about their travel patterns and how the roadway network performs for trucks.

Summary:
Community resilience depends on the resilience of the lifeline infrastructure and the performance of the disaster-related functions of local governments. State and federal resilience plans and guidelines acknowledge the importance of the transportation system as a critical lifeline in planning for community resilience and in helping local governments to set recovery goals.

Summary:
Roadway tolls are designed to raise revenue to fund transportation investments and manage travel demand and as such may affect transportation system performance and route choice. Yet, limited research has quantified the impact of tolling on truck speed and route choice because of the lack of truck-specific movement data.

Summary:
Global positioning systems (GPS) used for fleet management by trucking companies provide probe data that can support a truck performance-monitoring program. This paper discusses the steps taken to acquire fleet management data and then process those data so they can eventually be used for a network-based truck performance measures program.

Summary:
This report examines pedestrian and motorist behavior on arterials in Washington State and determines how, if at all, these behaviors change when various engineering treatments are applied. The treatments that were examined included crosswalk markings, raised medians, in-pavement flashers, signage, stop bars, overhead lighting, and sidewalks. The relationships between pedestrian travel and transit use, origin-destination patterns, traffic signals, and schools were also explored.

Summary:
This paper documents the development of data collection methodologies that can be used to measure truck movements along specific roadway corridors in Washington State cost-effectively. The intent of this study was to design and test methodologies that could provide information to ascertain the performance of freight mobility roadway improvement projects. The benchmarks created would be used to report on speed and volume improvements that resulted from completed roadway projects.

Summary:
This report documents the development of data collection methodologies that can be used to cost effectively measure truck movements along specific roadway corridors selected by transportation agencies in Washington State.

Summary:
As commercial vehicle activity grows, the environmental impacts of these movements have increasing negative effects, particularly in urban areas. The transportation sector is the largest producer of CO2 emissions in the United States, by end-use sector, accounting for 32% of CO2 emissions from fossil fuel combustion in 2008.

Summary:
Despite their heavy use of the road transportation system, little data is available on trip generation rates for trucks. In this paper, truck trip rates from grocery stores are used in a case study to evaluate and compare two simple methods for collecting data on truck trip generation: telephone interviews and manual counts. The findings from this study showed that grocery stores generated an average of 18 truck trips per day on a typical peak period weekday. The results also...

Summary:
The Washington State Department of Transportation (WSDOT), Transportation Northwest at the University of Washington (UW), and the Washington Trucking Associations (WTA) have partnered on a research effort to collect and analyze global positioning systems (GPS) truck data from commercial, invehicle, truck fleet management systems. This effort was funded by the Washington State Legislature, and its purpose is to develop a statewide freight performance measures program for use by WSDOT.

Summary:
The effective and efficient movement of freight is essential to the economic well-being of our country but freight transport also adversely impacts our society by contributing to a large number of crashes, including those resulting in injuries and fatalities.