Skip to content

Seattle Center City Alley Infrastructure Inventory and Occupancy Study 2018 (Task Order 4)

The Urban Freight Lab conducted an alley inventory and truck load/unload occupancy study for the City of Seattle. Researchers collected data identifying the locations and infrastructure characteristics of alleys within Seattle’s One Center City planning area, which includes the downtown, uptown, South Lake Union, Capitol Hill, and First Hill urban centers. The resulting alley database includes GIS coordinates for both ends of each alley, geometric and traffic attributes, and photos. Researchers also observed all truck load/unload activity in selected alleys to determine minutes vacant and minutes occupied by trucks, vans, passenger vehicles, and cargo bikes. The researchers then developed alley management recommendations to promote safe, sustainable, and efficient goods delivery and pick-up.

Key Findings

The first key finding of this study is that more than 90% of Center City alleys are only one-lane wide. This surprising fact creates an upper limit on alley parking capacity, as each alley can functionally hold only one or two vehicles at a time. Because there is no room to pass by, when a truck, van, or car parks it blocks all other vehicles from using the alley. When commercial vehicle drivers see that an alley is blocked they will not enter it, as their only way out would be to back up into street traffic. Seattle Municipal code prohibits this, as well as backing up into an alley, for safety reasons.

When informed by the second key finding‚ 68% of vehicles in the alley occupancy study parked there for 15 minutes or less‚ it is clear that moving vehicles through alleys in short time increments is the only reasonable path to increase productivity. As one parked vehicle operationally blocks the entire alley, the goal of new alley policies and strategies should be to reduce the amount of time alleys are blocked to additional users.

The study surfaces four additional key findings:

  1. 87% of all vehicles in the 7 alleys studied parked for 30 minutes or less. Given the imperative to move alley traffic quickly, vehicles that need more parking time must be moved out of the alleys and onto the curb where they don’t block others.
  2. 15% of alleys’ pavement condition is so poor that delivery workers can’t pass through with loaded hand carts. Although trucks can drive over fairly uneven pavement without difficulty, it is not the case for delivery people walking with fully loaded handcarts. The alley pavement rating was done with a qualitative visual inspection to identify obvious problems; more detailed measurements would be needed to fully assess conditions.
  3. 73% of Center City area alleys contain entrances to passenger parking facilities. Placing garage entrances in alleys has been a city policy goal for years. But it increases the frequency of cars in alleys and adds demands on alley use. Understanding why cars are queuing for passenger garages located off alleys, and providing incentives and disincentives to reduce that, would help make alleys more productive.
  4. Alleys are vacant about half of the time during the business day. While at first blush this suggests ample capacity, the fact that an alley can only hold one-to-two parked trucks at a time means alleys are limited operationally and therefore are not a viable alternative to replace the use of curb CVLZs on city streets.

These findings indicate that, due to the fixed alley width constraint, load/unload space inside Seattle’s existing Center City area alleys is insufficient to meet additional future demand.

Report

Supporting Comprehensive Urban Freight Planning by Mapping Private Load and Unload Facilities

 
Download PDF  (1.27 MB)
Publication Date: 2023
Summary:

Freight load and unload facilities located off the public right-of-way are typically not documented in publicly available databases. Without detailed knowledge of these facilities, i.e. private freight load and unload infrastructure, cities are limited in their ability to complete system-wide freight planning and to comprehensively evaluate the total supply of load and unload spaces in the city. To address this challenge, this research describes the development and application of a data collection methodology and a typology of private freight load/unload facilities for their inventory and documentation in dense urban centers.

The tools developed in this research are practice-ready and can be implemented in other cities to support research, policy and planning approaches that aim to improve the urban freight system. Assessment of the degree of harmonization between the current delivery vehicle dimensions and infrastructure they service is a crucial step of any policy that addresses private freight load/unload infrastructures. This includes providing: the adequate access dimensions, capacity to accommodate the volume and vehicle type, and an effective connecting design between the facilities and the public right-of-way.

A case study in Downtown Seattle found more than 337 private freight facilities for loading/unloading of goods but that translates into only 5% of the buildings in the densest areas of the city had these facilities. Alleys were found to play a critical role since 36% of this freight infrastructure was accessed through alleys.

This research results in the first urban inventory of private freight load/unload infrastructure, which has been shown to be a valuable resource for the City of Seattle that can be used to better understand and plan for the urban freight system.

Recommended Citation:
Machado León, J., Girón-Valderrama, G., Goodchild, A., & McCormack, E. Supporting Comprehensive Urban Freight Planning by Mapping Private Load and Unload Facilities (2023).
Report

The Final 50 Feet of the Urban Goods Delivery System: Completing Seattle’s Greater Downtown Inventory of Private Loading & Unloading Infrastructure (Phase 2)

 
Download PDF  (2.35 MB)
Publication Date: 2020
Summary:

This report describes the Urban Freight Lab (UFL) work to map the locations of all private loading docks, loading bays, and loading areas for commercial vehicles in Seattle’s First Hill and Capitol Hill neighborhoods and document their key design and capacity features, as part of our Final 50 Feet Research Program.

Taken together with the UFL’s earlier private freight infrastructure inventory in Downtown Seattle, Uptown, and South Lake Union, this report finalizes the creation of a comprehensive Greater Downtown inventory of private loading/unloading infrastructure. The Seattle Department of Transportation (SDOT) commissioned this work as part of its broader effort with UFL to GIS map the entire Greater Downtown commercial load/unload network, which includes alleys, curbs and private infrastructure.

The research team could find no published information on any major U.S. or European city that maintains a database with the location and features of private loading/unloading infrastructure (meaning, out of the public right of way): Seattle is the first city to do so.

By supporting and investing in this work, SDOT demonstrates that it is taking a high-level conceptual view of the entire load/unload network. The city will now have a solid baseline of information to move forward on myriad policy decisions. This commitment to creating a private load/unload infrastructure inventory is significant because infrastructure is often identified as an essential element in making urban freight delivery more efficient. But because these facilities are privately owned and managed, policymakers and stakeholders lack information about them—information critical to urban planning. By and large, this private infrastructure has been a missing piece of the urban freight management puzzle. The work represented in this section fills a critical knowledge gap that can help advance efforts to make urban freight delivery more efficient in increasingly dense, constrained cities, like Seattle.

Without having accurate, up-to-date information on the full load/unload network infrastructure—including the private infrastructure addressed here—cities face challenges in devising effective strategies to minimize issues that hamper urban freight delivery efficiency, such as illegal parking and congestion. Research has shown that these issues are directly related to infrastructure (specifically, a lack thereof). (4) A consultant report for the New York Department of Transportation found that the limited data on private parking facilities for freight precluded development of solutions that reduce double parking, congestion and other pertinent last-mile freight challenges. (5) The report also found that the city’s off-street loading zone policy remained virtually unchanged for 65 years (despite major changes like the advent and boom of e-commerce.)

Local authorities often rely heavily on outside consultants to address urban freight transport issues because these authorities generally lack in-house capacity on urban freight. (6) Cities can use the replicable data-collection method developed here to build (and maintain) their own database of private loading/unloading infrastructure, thereby bolstering their in-house knowledge and planning capacity. Appendix C includes a Step-by-Step Toolkit for a Private Load/Unload Space Inventory that cities, researchers, and other parties can freely use.

The method in that toolkit builds—and improves—on the prior data-collection method UFL used to inventory private infrastructure in the dense urban neighborhoods of Downtown Seattle, Uptown and South Lake Union in early 2017 (Phase 1). The innovative, low-cost method ensures standardized, ground-truthed, high-quality data and is practical to carry out as it does not require prior permission and lengthy approval times to complete.

This inventory report’s two key findings are:

  1. Data collectors in this study identified, examined, and collected key data on 92 private loading docks, bays and areas across 421 city blocks in the neighborhoods of Capitol Hill, First Hill, and a small segment of the International District east of I-5. By contrast, the early 2017 inventory in Downtown Seattle, Uptown, and South Lake Union identified 246 private docks, bays and areas over 523 blocks—proportionally more than twice the density of private infrastructure of Capitol Hill and First Hill. This finding is not surprising. While all the inventoried neighborhoods are in the broad Greater Downtown, they are fundamentally different neighborhoods with different built environments, land use, and density. Variable demand for private infrastructure—and the resulting supply—stems from those differences.
  2. A trust relationship with the private sector is essential to reduce uncertainty in this type of work. UFL members added immense value by ground-truthing this work and playing an active role in improving inventory results. When data collectors in the field found potential freight loading bays with closed doors (preventing them from assessing whether the locations were, in fact, used for freight deliveries), UPS had their local drivers review the closed-door locations as part of their work in the Urban Freight Lab. The UPS review allowed the researchers to rule out 186 of the closed-door locations across this and the earlier 2017 data collection, reducing uncertainty in the total inventory from 33% to less than 1%.

This report is part of a broader suite of UFL research to date that equips Seattle with an evidence-based foundation to actively and effectively manage Greater Downtown load/unload space as a coordinated network. The UFL has mapped the location and features of the legal landing spots for trucks across the Greater Downtown, enabling the city to model myriad urban freight scenarios on a block-by-block level. To the research team’s knowledge, no other city in the U.S. or the E.U. has this data trove. The findings in this report, together with all the UFL research conducted and GIS maps and databases produced to date, give Seattle a technical baseline to actively manage the Greater Downtown’s load/unload network to improve the goods delivery system and mitigate gridlock.

The UFL will pilot such active management on select Greater Downtown streets in Seattle and Bellevue, Washington, to help goods delivery drivers find a place to park without circling the block in crowded cities for hours, wasting time and fuel and adding to congestion. (7) One of the pilot’s goals is to add more parking capacity by using private infrastructure more efficiently, such as by inviting building managers in the test area to offer off-peak load/unload space to outside users. The U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy under the Vehicles Technologies Office is funding the project.

The project partners will integrate sensor technologies, develop data platforms to process large data streams, and publish a prototype app to let delivery firms know when a parking space is open – and when it’s predicted to be open so they can plan to arrive when another truck is leaving. This is the nation’s first systematic research pilot to test proof of concept of a functioning system that offers commercial vehicle drivers and dispatchers real-time occupancy data on load/unload spaces–and test what impact that data has on commercial driver behavior. This pilot can help inform other cities interested in taking steps to actively manage their load/unload network.

Actively managing the load/unload network is more imperative as the city grows denser, the e-commerce boom continues, and drivers of all vehicle types—freight, service, passenger, ride-sharing and taxis—jockey for finite (and increasingly valuable) load/unload space. Already, Seattle ranks as the sixth most-congested city in the country.

Recommended Citation:
Urban Freight Lab (2020). The Final 50 Feet of the Urban Goods Delivery System: Phase 2, Completing Seattle’s Greater Downtown Inventory of Private Loading/Unloading Infrastructure.
Report

Seattle Center City: Alley Infrastructure Inventory and Occupancy Study

 
Download PDF  (2.84 MB)
Publication Date: 2018
Summary:

The Supply Chain and Transportation Logistics (SCTL) Center conducted an alley inventory and truck load/unload occupancy study for the City of Seattle. Researchers collected data identifying the locations and infrastructure characteristics of alleys within Seattle’s One Center City planning area, which includes the downtown, uptown, South Lake Union, Capitol Hill, and First Hill urban centers. The resulting alley database includes GIS coordinates for both ends of each alley, geometric and traffic attributes, and photos. Researchers also observed all truck load/unload activity in selected alleys to determine minutes vacant and minutes occupied by trucks, vans, passenger vehicles, and cargo bikes. The researchers then developed alley management recommendations to promote safe, sustainable, and efficient goods delivery and pick-up.

Key Findings:

The first key finding of this study is that more than 90% of Center City alleys are only one lane wide. This surprising fact creates an upper limit on alley parking capacity, as each alley can functionally hold only one or two vehicles at a time. Because there is no room to pass by, when a truck, van, or car parks it blocks all other vehicles from using the alley. When commercial vehicle drivers see that an alley is blocked they will not enter it, as their only way out would be to back up into street traffic. Seattle Municipal Code prohibits this, as well as backing up into an alley, for safety reasons.

When informed by the second key finding—68% of vehicles in the alley occupancy study parked there for 15 minutes or less—it is clear that moving vehicles through alleys in short time increments is the only reasonable path to increase productivity. As one parked vehicle operationally blocks the entire alley, the goal of new alley policies and strategies should be to reduce the amount of time alleys are blocked to additional users.

The study surfaces four additional key findings:

  1. 87% of all vehicles in the 7 alleys studied parked for 30 minutes or less. Given the imperative to move alley traffic quickly, vehicles that need more parking time must be moved out of the alleys and onto the curb where they don’t block others.
  2. 15% of alleys’ pavement condition is so poor that delivery workers can’t pass through with loaded hand carts.  Although trucks can drive over fairly uneven pavement without difficulty, it is not the case for delivery people walking with fully loaded handcarts.  The alley pavement rating was done with a qualitative visual inspection to identify obvious problems; more detailed measurements would be needed to fully assess conditions.
  3. 73% of Center City area alleys contain entrances to passenger parking facilities. Placing garage entrances in alleys has been a city policy goal for years. But it increases the frequency of cars in alleys and adds demands on alley use. Understanding why cars are queuing for passenger garages located off alleys, and providing incentives and disincentives to reduce that, would help make alleys more productive.
  4. Alleys are vacant about half of the time during the business day. While at first blush this suggests ample capacity, the fact that an alley can only hold one-to-two parked trucks at a time means alleys are limited operationally and therefore are not a viable alternative to replace the use of curb CVLZs on city streets.

These findings indicate that, due to the fixed alley width constraint, load/unload space inside Seattle’s existing Center City area alleys is insufficient to meet additional future demand.

Recommended Citation:
Urban Freight Lab (2018). Seattle Center City: Alley Infrastructure Inventory and Occupancy Study.